BEXON TOOLS

BEXON TOOLS OFFERS A WIDE RANGE OF AIR TOOLS AND AUTOMOTIVE TOOLS www.bexontools.com

« How to Remove Bolts With an Air ChiselAir Chisels for Removing Ceramic Tile »

How to Change the Bits on the Air Chisel

How to Change the Bits on the Air Chisel

Change the Bits on the Air Chisel
Change the Bits on the Air Chisel
 
An air chisel is a great tool and one of the first a do-it-yourselfer should buy if he is lucky enough to have an air compressor in his shop. While an air chisel is thought of as just a chisel, the truth is this tool can be fitted with bits to chisel, hammer, crimp sheet metal flanges and clean welds. Changing tasks is a cinch, requiring only a few seconds to change the bit or accessory.

Instructions

Things You'll Need:

  • Assortment of air chisel bits
  1. Grasp the air chisel around the spring on the barrel.
  2.  

    Push the tab at the top of the spring in a counterclockwise direction with your thumb. This will open the spring and push it slightly off to one side.

  3.  

    Pull the bit from the air chisel with your opposite hand.

  4. Change to a new bit by pushing the shank into the tool while again forcing the spring open and to the side.
 

Tips & Warnings

  •  
    Always wear safety glasses when using any chiseling tool.


 

Post comment:

◎welcome to give out your point。

Calendar

Comments

Previous

Powered By Z-Blog 1.8 Walle Build 100427  Theme By Bokezhuti.cn

Copyright BEXON TOOLS Rights Reserved.